publications

peer review

  1. C. J. R. Gonzalez Oliver, F. C. Lovey, A. Caneiro, D. O. Russo, D. S. Rodriguez, F. Soldera, J. E. Fiscina, J. Ma. Rincon, Crystallization of Iron Phosphate Glasses Containing up to 18wt% UO2, Journal of Non-Crystalline Solids 356,(52-54), 2010, pp. 2986-2993, doi:10.1016/j.jnoncrysol.2010.06.034.
  2. J. Garcia, R. Pitonak, F. Soldera, F. Miguel, S. Suarez, H. Pinto, A. Kostka, F. Mücklich, Design and Characterization of Novel Wear Resistant Multilayer CVD Coatings with Improved Adhesion of Al2O3 and Ti(C,N), Advanced Engineering Materials 12 (9), 2010, pp. 929-934.
  3. C. Carrasco, C. Camurri, J. García, C. Montalba, O. Prat, D. Rojas, Microstructure investigations and mechanical properties of an Al-Al2O3 MMC produced by semi-solid solidification, Materialwissenschaft und Werkstofftechnik 42 (6), 2011, 542–548.
  4. C. J.R.González Oliver, A. Caneiro, J. Garcia, Formation of nanocrystalline phases in sol-gel masses in the Fe-W-C(O) system and densification up to 1.100ºC, Procedia Materials Science 1 ( 2012 ) 95 – 103. 11th International Congress on Metallurgy & Materials SAM/CONAMET 2011.
  5. José Garcia, Greta Lindwall, Orlando Prat, Karin Frisk, Kinetics of formation of graded layers on cemented carbides: Experimental investigations and DICTRA simulations, Int. Journal of Refractory Metals and Hard Materials 29, 2011, pp. 256–259.
  6. J . Balach, F. Miguel, F. Soldera, D.F. Acevedo, F. M Mücklich & C.A. Barbero, A direct and quantitative image of the internal nanostructure of nonordered porous monolithic carbon using FIB nanotomography, Journal of Microscopy 246, 2012, pp. 274–278, doi: 10.1111/j.1365-2818.2012.03615.x.
  7. S. Suárez, F. Soldera, C. González Oliver, D. Acevedo and F. Mücklich, Thermomechanical Behavior of Bulk Ni/MWNT Composites Produced via Powder Metallurgy, Advanced Engineering Materials 14, 2012, pp. 499-502. doi: 10.1002/adem.201200100.
  8. A. Gallegos, C. Camurri, C. Carrasco, F. Soldera, Effects of surface modification of thin wires of AISI 302 stainless steel by electrolytic plasma on its mechanical properties, Revista de Metalurgia 48 (6) 2012, pp. 459-466.
  9. G. Requena, D. Canelo Yubero, J. Corrochano, J. Repper, G. Garcés, Stress relaxation during thermal cycling of particle reinforced aluminium matrix composites, Composites: Part A 43, 2012, pp. 1981–1988.
  10. J. Garcia, R. Pitonak, L. Agudo, A. Kostka, Synthesis of titanium carbonitride coating layers with star-shaped crystallite morphology, Materials Letters 68, 2012, pp. 71–74.
  11. S. Suárez, E. Ramos-Moore, F. Mücklich, A high temperature X-ray diffraction study of the influence of MWCNTs on the thermal expansion of MWCNT/Ni composites, Carbon 51, 2013, pp. 404–409.
  12. F. L. Miguel, H. Shen , F. Soldera, T. Fischer, R. Müller, S. Mathur, F. Mücklich, Electroless deposition of a Ag matrix on semiconducting one-dimensional nanostructures, Thin Solid Films 536, 2013, pp. 54-56.
  13. J. Balach, F. Soldera, D. F. Acevedo, F. Mücklich, C. A. Barbero, A Direct and Quantitative Three-Dimensional Reconstruction of the Internal Structure of Disordered Mesoporous Carbon with Tailored Pore Size, Microscopy and Microanalysis 19, 2013, pp. 745-750.
  14. D. S. Rodríguez, P. A. Arboleda, D. O. Russo, F. Soldera, C.J.R. González Oliver, J. Ma. Rincón, Thermal behaviour of iron aluminium phosphate glasses containing UO2.67, Glass Technology: European Journal of Glass Science and Technology A 54 (3) 2013, pp. 111-118.
  15. M.F. Moreno, C.J.R. González Oliver, Liquid phase densification of Al-4.5 wt.% Cu powder reinforced with 5 wt.% Saffil short fibers during hot pressing, Powder Technology 245 (2013) 13–20.

conference procedings

  1. P.A Arboleda Zuluaga, D.S Rodríguez, C. González Óliver, J.M Rincón López, F. Soldera, Efecto de la adición de Na2O en las propiedades térmicas y durabilidad química de vidriod fosfatos de hierro y uranio, CONAMET/SAM, 2012.
  2. C. J.R. González Oliver, E. A. Alvarez, J. L. Garcia, E. R. Benavidez, E. Brandaleze, Densificación de compuestos FE/CO - WC sinterizados bajo atmósfera de H2-AR, CONAMET/SAM, 2012.
  3. J. Candia, C. Carrasco, C. Camurri, F. Soldera, Efecto del cerio en la microestructura de un material compuesto base alumunio obtenidor por fusión directa de latas de bebida, CONAMET/SAM, 2012.
  4. D. Rojas, J. García, O. Prat, G. Sauthoff, A.R. Kaysser-Pyzalla, Alloy desgin, microstructure evolution and creep response at 650°C of 9%Cr heat resistant steels, CONAMET/SAM, 2012.
  5. O. Prat, J. García, D. Rojas, G. Sauthoff, G. Inden, The role of laves phase on microstructure evolution and creep strenght of (novel) 9%Cr heat resistant steels, CONAMET/SAM, 2012.

kabeza
Web design and
development

Optimized for google chrome & mozilla firefox